XERO
XERO DI Cart - Single
XERO DI Cart - Single
Couldn't load pickup availability
About the XERO DI Cart - Single
The XERO DI Cart - Single is the perfect DI water filtration system for new window cleaners, occasional users, and those working in areas with soft water or a TDS level under 100 ppm. Utilizing a 40-inch DI cartridge and a carbon pre-filter, this system is guaranteed to leave windows with a sparkling, spot-free clean.
How it Works
Source water is fed into the carbon pre-filter to remove large impurities. After, the water then hits the DI cartridge with DI resin that uses deionization to pull impurities from water and make it pure. Finally, it flows out to your hose and pole for effective water-fed window cleaning.
Construction
The XERO DI Cart - Single is made from high-quality materials and is built in-house by the XERO team to ensure it's perfect and ready to use right out of the box. The 40-inch DI cartridge sits inside a stainless steel housing securely mounted on a robust powder-coated steel frame. A pre-filter housing sits on the back to hold the 10-inch carbon filter. To ensure smooth and hassle-free mobility across various terrains, this system is equipped with two no-flat wheels. Additionally, it utilizes brass garden hose fittings to ensure reliable and leak-free connections.
Features
Weighing only 42 lbs, the XERO DI Cart - Single is exceptionally easy to transport, set up, and maintain, making it convenient for on-the-go window cleaners. To help monitor water quality effectively, this cart also comes with a TDS meter. Once the TDS meter reads higher than usual, you can easily refill your DI cartridge using 1/4 cubic foot of resin, allowing for cost-effective operation. The inclusion of the 10-inch carbon pre-filter helps the DI to last longer. After reaching 5,000 gallons, replace your carbon filter to keep your system running smoothly.
What's Included:
- TDS Meter
- Small Filter Wrench
- Aladdin Magic Lube
- Owner's Manual
PRODUCT HIGHLIGHTS
- 40-inch refillable DI cartridge
- Carbon pre-filter to increase the DI lifespan
- Built on a powder-coated steel frame
- Two no-flat wheels
- Lightweight and easy to transport
- Can be used standing up or lying down
- Best used in soft water areas
- Durable brass garden fittings
| SKU | 209-21-23 |
Questions & Answers
Have a Question?
-
Hi how much gallons of pure water does this system take before changing the the filtration system i know the carbon is 5000 but how about the resin?
How long your resin lasts depends largely on the TDS you are working with. If you are working with the recommended TDS of 100 or lower, you should be able to produce 1000 + gallons of pure water. Always keep an eye on your TDS reading, and be ready to swap your resin out when the reading creeps consistently over 10 ppm.
-
Which cartridge fits in this?
Great question, Cody! This system takes a 40-Inch DI Canister, however, it does come pre-loaded and ready to go!
-
how many gallons per minute will this DI or D1 unit allow to flow thru. I am also interested in the psi available. The main concern is the pressure that is generated. Hose size that is recommended.
Hi Robert! You have a lot of great questions! To start, this unit will produce up to 1 gallon per minute, depending on incoming source pressure. You would hook up to the source with a standard garden hose. Depending on how you plan to utilize this system is what will dictate how much, and which type of hose you will need, but you will surely need the waterfed tubing that will come with your waterfed pole of choice. Please give us a call at 862-266-0677 so one of our product specialists can assist in the best product selection for you.
