XERO
XERO Carbon Fiber Trad Pole 2.0 Replacement Sections
XERO Carbon Fiber Trad Pole 2.0 Replacement Sections
XERO
XERO Carbon Fiber Trad Pole 2.0 Replacement Sections
XERO Carbon Fiber Trad Pole 2.0 Replacement Sections
Couldn't load pickup availability
About the XERO Carbon Fiber Trad Pole 2.0 Replacement Sections
The XERO Carbon Fiber Trad Pole 2.0 comes in a variety of lengths. If you happened to buy a shorter one like the 8 or 12 foot to start, you can use these sections to add extra length when you're ready to upgrade. You can also use these as replacement sections if part of your Trad Pole 2.0 gets broken or damaged. They are made to the same high quality as your original pole and include a clamp.
**Please note that the black trad pole option is available in 5 sections and the colored poles are only available in three.
Use this chart to determine which sections you need to increase the length of your pole:
| Starting Pole | For a 12' Pole | For a 16' pole | For a 20' Pole |
|---|---|---|---|
| 8 Foot | add section 3 | add sections 3 + 4 | add sections 3 + 4 + 5 |
| 12 Foot | N/A | add section 4 | add sections 4 + 5 |
| 16 Foot | N/A | N/A | add section 5 |
| SKU | 209-20-232 |
Questions & Answers
Have a Question?
-
Do you have pole section 6 for this pole as I need to add another section to easily reach 3 storie buildings and roof lights. I currently have 5 sections but need one more.. Gary
Hi Gary! The XERO Carbon Fiber Trad Pole is only designed to extend to 20 ft which is currently only five sections. We would recommend considering the Unger TelePlus Pole, or the Moerman Telescopic Pole, both of which come in 30ft options.
-
Is there any section 6 and 7 replacement on this pole? If yes, i it possible to share the link I can’t locate it in your website. Thank you
The XERO Carbon Fiber Trad Pole 2.0 only goes up to section 5. We do not recommend using this pole beyond 20 ft.
-
What do I need for a 12 ft pole?
Hi! For the 12ft XERO Trad Pole, you would need sections 1, 2, and 3. But you cal also grab a full 12 ft HERE.
-
I got the 12 foot pole. What would I need to make it 20ft?
To make your 12 ft XERO Carbon Fiber Trad pole a 20ft, you would need to add sections 4 & 5. Make sure you pop off the end defender of your section 3 before adding more pole sections.
-
What section would I need to convert a 12’ pole to 16’?
You would need section #4 for the added length.
-
Can I add a #5 to make 20ft pole go higher?
XERO Micro sections can be added to extend the XERO trad pole. You would be looking for section 6, but there is no end protection on that section so that is not recommended. Instead, it is highly encouraged to add both sections 6 & 7, as 7 has end protection.
-
How do you replace a broken clamp on section #2? I can't seem to locate one on your website.
Hi Jerry, you can find any clamp size you need for the XERO poles here:
https://windowcleaner.com/products/xero-replacement-complete-clamps -
I bought 16ft pole meed 20. What section do i need to make my trad pole longer. #1 or #5?
#5
-
I bought the xero 2.0 trad 16 pole what # section do i order to make it a 20? Its marked # 1 # 2 #3 #4 #5 Thanks.
You will need the #5 section.
-
Is the xero 2.0 trad pole #5 section the section that makes it 20 feet? Because i bought the trad 16 i want to get the pole that makes it 20 ft. Just want to make sure im getting the right section. Thanks
Correct. You will need the #5 to go from 16' to 20'.
-
I’m looking for a carbon fiber pole for a completely different use than what these are sold for, but I think they may work. Can you tell me if any of the sections have an OD of 1.25”? I’m looking for a roughly 55” section.
The OD of section 5 (20') is 1.25".
