X-Jet
X-Jet Pail System
X-Jet Pail System
Couldn't load pickup availability
About the X-Jet Pail System
Eliminate Spills with the X-Jet Pail System! This totally enclosed system is an excellent addition to your X-Jet nozzle. This assembly consists of a 5-gallon rectangular pail with a custom-made cap and a shaft and elbow combo. Remove the screen and barb from your X-Jet hose and connect it to your pail. Slightly open the small cap to vent for proper use. Easily transport this around the job with the molded handle pail. The PVC tube draws all but 1/8 inch of the chemicals out. To refill, just unscrew the top.
| SKU | 025-57-05 |
| Manufacturer Part Number | XPSA |
Questions & Answers
Have a Question?
-
Hi, won’t the barb rust due to the SH going through it ?
This barb is brass, which will not rust and should be flushed with clean water intermitently for general care.
-
What about the filter. Is there one in the pale?
There is no filter included with the X-Jet Pail System.
-
Are you supposed to cut off the end of the x jet hose to fit it around the tip of the Pail?
Yes, there is a strainer that needs to be cut off the hose for it to attach to the barb on the pail.
WARRANTY
