About the Winsol Crystal Clear 550 Glass Restorer

Winsol Crystal Clear 550 is a glass restorer designed to remove stage 1 alkaline buildup and reduce the effects of minute pitting and hard water buildup. It eliminates alkaline residues, exhaust particles, chemical and mineral deposits, water spots, the runoff from brick, concrete, and mortar. It is excellent for new building cleanups.

 How to Use Winsol Crystal Clear 550 Glass Restorer:

• Clean glass thoroughly prior to adding the solution. 
• Use undiluted or may be diluted by 50% with cool water. Do not use in direct sun or on hot glass, rinse to cool, if necessary
• Using a scrub sleeve, towel, sponge, or white scrub pad, apply sparingly to moisten the surface of the glass. DO NOT SPRAY OR ATOMIZE. Avoid contact with other surfaces. If it is running off the glass, you are using too much. 
• Give it 20-30 seconds to begin dissolving deposits, and then gently scrub to loosen deposits. Do not allow to dry on glass.
• After 1 minute, stop the restoration process by thoroughly rinsing with water or a dilute solution of trisodium phosphate, then squeegee dry. Repeat application for stubborn deposits that often come off in layers.

PRODUCT HIGHLIGHTS

• Removes stage I corrosion
• Effective on most glass
• Removes hard water stains, water spots, building run-off, mineral deposits, iridescent surface stains, alkaline residue, and iron oxide.