Would anyone have an idea of how to make this fit.
The thicker yellow hose is coming FROM my DI tank.
The thinner one is my WFP TUBING.
What am I missing?
Would anyone have an idea of how to make this fit.
The thicker yellow hose is coming FROM my DI tank.
The thinner one is my WFP TUBING.
What am I missing?
Are you not able to connect your tubing to the di hose? Do you have a better picture that doesn’t include your hand?
Looks like you need either a 5/16 push fit to 3/8 mnpt (or fnpt, hard to tell from the picture), or a 5/16 barb to 3/8.
Or duct tape.
looks like your connector is from a hardware store, wfp tubing is a different size.
It appears to be a Rectus fitting on your DI Hose. For the tube to connect you’ll need the appropriate Rectus tail with 6mm Barb inserted into the tube (eyeballing the connection it looks like a Rectus 21).
Yes, Rectus 21 barbed tail with clamp is required
Jeff is that ball a tool or just for stress relief? Lol
Ha, it’s a end protector. Goes on hose ends so when dragging the expensive rectus fittings sent as damaged.
If you’re in the states you’ll have a much easier time finding standard size fittings at your local hardware store rather than metric.
Looks like you need a 3/8 to 5/16 reducer. I prefer the push-to-fit connections like the John Guest kind. There are many ways to get there. Looks like you have a ball valve there. I do too.
Here’s mine.
Look for fittings that are used with water/liquids, they won’t leak as easy and last longer.